|
|
Post by coopdad on May 11, 2010 4:21:39 GMT -5
|
|
|
|
Post by scaleautostyle on May 11, 2010 6:03:27 GMT -5
they cam from a diecast racer. I start working on them a couple time ago. but put aside because no answer from customer to buy them. the problem with these tire are the same as the jada series... they are only 5/8 of a tire. the rim is ok at the front of the tire but at the other side it cover almost 90% of the tire.
so I have to cast to half to make one full tire.
anyway one day they will be release
yours
|
|
smash
New Member
Posts: 12
|
Post by smash on Aug 20, 2010 3:12:08 GMT -5
Man i wish Doug was still building! He built some sick stuff. I have some of these that I got from him a while back if you want to see. Just have to dig them out of one of the 21 boxes my model stuff is in.
|
|
|
|
Post by rubcon on Aug 20, 2010 23:25:56 GMT -5
They came from the Schlesser buggy. I got one a couple weeks ago. You will have specs tomorrow afternoon.
Danny
|
|
|
|
Post by rubcon on Aug 22, 2010 13:39:50 GMT -5
Ok here are the measurements for the front tire. 30mm high, rim width 17mm, overall width 8mm, and tread width 6mm. The rear tire is 33mm high, rim width 18mm, overall width 12mm, and tread width 10mm. Hope this helps you out some. Sorry no pics, kids broke camera yesterday at the museum lol
Danny
|
|
