|
Post by coopdad on Nov 1, 2010 10:06:14 GMT -5
Gang, I recently "built" Detail Master's Photo Etch Racing harness and since the instructions are very vague I thought I would post diagrams of what I figured out. The instructions have handy templates for cutting the belts (marked A-D) but they failed to say which goes to which buckle. Here is what I figured out (their instructions with my notes in blue): Also, because visualizing can be difficult sometimes I sketched out the why I believe the straps go through the buckles: Keep in mind, this is a quick sketch with the belt widths not drawn to scale or buckles are not drawn exactly as they are in the set. For instance, the very thin "B" belt is obviously drawn too thin. Also keep in mind this thread is based on the buckles that come with this particular set of Detail Master PE belts, not other brands (though they might be the same). Hope this helps someone... it sure would have helped me when I put together mine. John
|
|
|
Post by wtsf150 on Nov 1, 2010 16:04:50 GMT -5
John thanks for this i too have this same set and this will help out when it comes time for me to use it Willie
|
|
|
Post by Big Ed on Nov 3, 2010 18:48:23 GMT -5
Hey all. Even though I am not an interior detail hound, I got this same set here at home and have looked at it several times thinking "hmmmmmmmmmm, now what"? This will certainly take the sting out of building the belts because I will eventually have to put belts in something. Thank you John.
|
|