|
Post by 71drolds on Feb 10, 2011 13:48:52 GMT -5
how can i get the wheels out of the hard plastic so real iroks? i want to switch them with the soft rubber boggers on my jimmy. the wheels from the boggers are mounted to the model and i cant get them off. i need to get these iroks off without destroying the tire or the wheel!
|
|
|
Post by wtsf150 on Feb 10, 2011 15:28:52 GMT -5
I have never tried to take some off while on the model i have taken them out though using very hot water i soaked the tire/wheel in the water and with alot of force push the wheel through the tire as for the ring on the back side i have been lucky enough to "pop" this off by gently prying up on it the water trick was done of course on the boggers not the iroks soory i'm not much help on taking them off while on the model if your wheels are mounted to the model with suoer glue i have heard of people putting the part or model in a freezer for a while and the the parts break off fairly easy but i have never tried this so i cant say weither or not it would work Willie
|
|
|
Post by 71drolds on Feb 10, 2011 15:31:53 GMT -5
i figured it out! check out the "press" i made in the turtorials
|
|
|
Post by tooltas on Feb 11, 2011 22:22:56 GMT -5
lucky u got the soft boggers the ones that i have are hard ones had hard time getting mine out too
|
|
|
Post by 71drolds on Feb 13, 2011 21:37:12 GMT -5
well now ya know how to get them out painfree!
|
|